Gasoline Iron - Seterika gas

This Gasoline Irons is made in England.
I do not know whether it's working or not. I just keep it as a display items.
Price for both irons: RM400 or RM250 per pc

History of Clothing Irons

Though objects have been used for thousands of years to remove wrinkles and/or press clothing, for much of that time only the wealthy had their clothes so treated. Because the use of such implements was hard and laborious, only the rich could afford to employ people (usually slaves or servants) to do the work. In about 400 B.C. , Greeks used a goffering iron to create pleats on linen robes. The goffering iron was a rolling pin-like round bar that was heated before use.

Empire-era Romans had several tools similar to the modern iron. One was a hand mangle. This flat metal paddle or mallet was used to hit clothes. The wrinkles were removed by the beating. Another implement was a prelum. This was made of wood and not unlike a wine press. Two flat heavy boards were put between a turnscrew, also made of wood. Linen was placed between the boards and the increasing pressure applied by the turmscrew created pressure to press the fabric.

The ancient Chinese also had several primitive types of irons, including the pan iron. The pan iron looked rather like a large ice cream scoop. This iron had an open compartment with a flat bottom and a handle. The compartment held hot coal or sand, which heated the bottom of the pan iron. It was moved across clothing to remove wrinkles.

By about the tenth century A.D., Vikings from Scandinavia had early irons made of glass. The Vikings used what was called a linen smoother to iron pleats. The mushroom-shaped smoother was held near steam to warm up, and was rubbed across fabric.

What contemporary consumers would recognize as an iron first appeared in Europe by the 1300s. The flatiron was comprised of a flat piece of iron with a metal handle attached. To heat the iron, it was held over or in a fire until it was hot. When a garment was pressed with the flatiron, it was picked up with a padded holder. A thin cloth was placed between the garment and the iron so that soot would not be transferred from implement to the finished garment. The flatiron was used until it was too cool to do its job. Many people owned several flatirons so they could heat one or more while one was being used.

In approximately the fifteenth century, an improvement over the flatiron was introduced. The hot box (also known as the box iron or slug iron) was made of a hollow


A typical clothes iron.
metal box with a smooth bottom and a handle. Inside, hot coals, bricks, slugs (heated metal inserts) or some other heating element were placed. This eliminated the need for an extra cloth between clothing and iron because the iron did not get the clothes dirty. Both the flatiron and hot box were used for several hundred years.

Many innovations in iron technology came in the nineteenth century. When cast iron was invented in the early part of the nineteenth century, some of the problems with flatirons were solved. With the advent of cast iron stoves, flatirons could be heated on top of them, which was much cleaner than a fire. By the 1820s, cast iron was also used to make flatirons. These irons were called sad irons because they were heavy, weighing about 15 lb (5.6 kg), and hard to move.

Like flatirons, sad irons were heated on the stovetop, but they sometimes heated unevenly. The handle also heated up, which posed problems for users. American Mary Potts solved these predicaments in 1870. She made a cardboard base and filled it with plaster of Paris. This was placed around the iron's body and kept it cooler for more even heating. Potts also devised a detachable wooden handle that was spring loaded for the sad iron. Because wood does not hold heat in the same way that iron does, the person using the iron would not be burned.

After gas became available in American homes in the late 1800s, gas irons came into existence. The earliest were patented in 1874. Homes had individual gas lines into them, and the gas iron was hooked up to the gas line by a pipe. The iron contained a burner to which the gas flowed. When the burner was lit with a match, the iron heated up. The iron was very hot and gas sometimes leaked, but the gas irons were lighter than sad irons. Other fueled irons soon followed. These irons were heated with oil, gasoline, paraffin, and other fuels.

The electric iron was invented in the 1880s when electricity became widely available in homes. The first electric iron was patented by Henry W. Seeley in 1882. His iron was hooked up to an electrical source by detachable wires. The electricity stimulated the iron's internal coils. But Seeley's iron, like many early electric irons, did not have electric cords. The irons were heated on a stand. One big problem with Seeley's iron was that it heated very slowly on the stand, and cooled quickly while in use. This iron had to be reheated frequently.

By the turn of the century, iron technology had progressed considerably and irons became more common in American house-holds. In 1903, irons with electric cords directly attached to the iron were being sold. Earl Richardson invented a sole plate (the bottom part of the iron that is made of metal and does the actual pressing) that improved how and where sole plates were heated for better ironing. His iron had more heat in the tip than in the center and was known as the Hotpoint.

In the 1920s, Joseph Myers improved the iron and cord by adding an automatic heat control made of pure silver. Thermostats soon became a standard feature. The first cordless irons were introduced in 1922, though they did not catch on. (The first successful cordless irons were sold in 1984).

In 1926, the steam iron was introduced by the Eldec Company. Steam made it easier to smooth dry stiff fabrics. Previously the user sprinkled water on dry clothing, or clothing had to be ironed when damp. The steam irons employ a water tank that allows heated water vapor to be created and applied through small holes on the sole plate. Steam irons did not become popular until the 1940s.

Edward Schreyer conquered the problem of rusting sole plates in 1938. He developed an aluminum alloy that would not rust or leak. Irons that could vary between steam or dry were introduced in the 1950s. The first iron with automatic shut off was introduced in 1984.

Contemporary irons have nonstick coating on the sole plate, an innovation that was introduced in 1995. Most featured bodies made of plastic and more holes on the sole plate to allow steam to come through. A whip holds the cord out of the way during use. In 1996, about 13-14 million irons with a variety of features were sold in the United States